一．适用：
牛仔布(涂层布，压光布除外)、硅油布、尼龙布、TPU、PU皮革等。
二．性能指标：
外观及组成：半透明状粘稠体，聚氨酯聚合物
布氏粘度：120000~140000CPS
PH值：7.0±0.5
固体含量：50%±1
三．特性：
PU200A牛仔水性墨白（防冻防污染型）：牢度超强，不粘手，高光泽，水洗牢度超好，高附着力，耐黄变，抗冻型
PU200B牛仔水性墨透（防冻防污染型）：牢度超强，不粘手，高光泽，水洗牢度超好，高附着力，耐黄变，抗冻型
四．参考配方
|
调深色 |
调浅色 |
||
|
PU200牛仔墨白 |
20% |
PU200牛仔墨白 |
60% |
|
PU200牛仔墨透明 |
80% |
PU200牛仔墨透明 |
40% |
|
色浆 |
3-5% |
色浆 |
3-5% |
|
1008固化剂 |
2.5% |
1008固化剂 |
2.5% |
|
1、印前:先将固化剂加入浆内充分搅拌均匀，印花色浆添加量换控制在8%以内。 2、印后:印花成品自然干燥24小时后，或180℃压烫20秒，或180℃烘2~3分钟即可水洗。 3、加入固化剂的石磨胶浆必须在6~8小时内用完。 |
|||
注意事项：
由于牛仔面料多种多样，在印花之前需要先行测试。在有涂层的布料上印花，需要测试布料涂层跟PU体系的粘结强度.
Other detailed information
|
Brand |
Conghui |
Model |
200 |
|
Viscosity |
/ |
PH Value |
7.0±0.5 |
|
Odor |
/ |
Strength |
100T |
|
Fineness |
/um |
Appearance |
|
|
Usage |
Color strength |
100% |
|
|
Fluidity |
/mm |
Shelf life |
12months |
|
Single net weight |
5KG |
Resin type |
/ |
|
Ionic |
/ |
Appearance color |
一．Substrates
Denim(except coated fabric,press polish fabric) , silicone oil cloth, Nylon,TPU and PU leather.
二．Performance and indicators
Appearance and composition:translucent viscous body,polyester
Brinell viscosity:120000~140000cps
PH Value:7.0±0.5
Solid content:50%±1
三．Features
PU200A denim watherbased ink white（anti-freeze/anti-pollution type）：excellent fastness,non-stick,high glossiness,super well wash fastness,high adhesion,resistance to yellowing,anti-freeze type.
PU200B denim waterbased ink clear（anti-freeze/anti-pollution type）：excellent fastness,non-stick,high glossiness,super well wash fastness,high adhesion,resistance to yellowing,anti-freeze type.
四．Reference formula
|
Dark |
Light |
||
|
CH-200 denim ink white |
20% |
CH-200 denim ink white |
60% |
|
CH-200 denim ink transparent |
80% |
CH-200 denim transparent |
40% |
|
paste |
3-5% |
paste |
3-5% |
|
1008 curing agent |
2.5% |
1008curing agent |
2.5% |
|
1.before：add curing agent into paste and stir completely, the amount of printing paste should controlled within 8% 2.After: The finished product natural drying after 24hours,or heat pressure at 180℃ for 20 seconds,or baked at 180℃ for 2-3minutes and then wash 3.The graphite mucilage with curing agent should used up within 6-8hours. |
|||
Notes
Due to the variety of denim fabric, you would better make a test before printing, printing on the fabric with layer, should have a test about viscosity of fabric layer and PU system.
 台州市聪慧精细化工有限公司 |
|
|
65 全部产品 |
|
|